Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Instrukcja Użytkownika Strona 74
- Strona / 80
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Dell HPC NFS Storage Solution High Availability Configurations with Large Capacities
74
A.10. Performance tuning on clients
1. If the clients access the NFS server via 10GbE, configure the MTU on the 10GbE device to be 8192
for all the clients. Note that the switches need to be configured to support large MTU as well.
On the client, if the value of MTU is not specified in /etc/sysconfig/network-
scripts/ifcfg-p2p1,
# echo “MTU=8192” >> /etc/sysconfig/network-scripts/ifcfg-p2p1,
Otherwise change the old value to 8192 in /etc/sysconfig/network-scripts/ifcfg-p2p1.
where ifcfg-p2p1 if the 10GbE network interface.
Restart the networking services.
# service network restart
2. If the clients access the NFS server via 10GbE, the Ethernet switches on the fabric should have flow
control disabled. The following instructions are for the PowerConnect 6248 and the PowerConnect
8024 and can be used as a reference.
Start a console session to the switch and type the following commands in sequence:
console>enable
console#configure
console(config)#no flowcontrol
In order to verify the setting of the option, type the following command:
console#show interface status
A message of “Flow Control:Disabled” will be printed out.
3. For each client, Add the following to /etc/sysctl.conf
Increasing the default TCP receive memory size
net.ipv4.tcp_rmem = 4096 2621440 16777216
Activate the changes with sysctl -p.
- Xin Chen, Garima Kochhar 1
- Dell HPC Engineering 1
- Version 2.1, May 2012 1
- Contents 3
- Figures 5
- Introduction 1 7
- NSS-HA solution review 7
- 2.1. Availability in NSS-HA 9
- NSS-HA architecture 3 10
- 3.1. Storage in NSS-HA 11
- Figure 5 12
- Table 1 13
- 4.1. Storage density 14
- 4.2. Storage configuration 15
- 4.5. Summary of changes 16
- Evaluation 5 17
- 5.2. Test bed 18
- NSS-HA test bed Figure 7 19
- 5.3. Tuning options 22
- 5.4. Functionality tests 23
- Performance tests 6 25
- Throughput in MB/s 26
- Throughput: MB/sec 28
- IB Random Write Performance 30
- IB Random Read Performance 31
- IB File Create Performance 32
- IB File Stat Performance 33
- IB File Remove Performance 33
- Conclusion 7 36
- References 8 37
- A.1.2. Checklist 42
- A.2. Server hardware setup 43
- A.2.1. Checklist 44
- -3.0.4-2.el6.x86_64.rpm 45
- A.3.2. Configure Multipath 46
- A.3.8. Checklist 53
- A.4.1. Checklist 55
- A.5. Storage hardware setup 56
- Port 0 Port 1 Port 0 Port 1 57
- A.6. Storage configuration 59
- A.6.1. Checklist 61
- A.7. NSS HA cluster setup 62
- A.7.2. Create HA cluster 63
- A.7.3. Verification 65
- A.8. Quick test of HA setup 68
- A.11. Scripts 75
- B.1. IOzone 76
- B.2. mdtest 78
- B.3. Checkstream 79
- B.4. dd 80
Powiązane produkty i podręczniki dla Serwery Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Serwery Red Hat NETSCAPE ENTERPRISE SERVER 6.0 - PROGRAMMER GUIDE TO SERVLETS Podręcznik Użytkownika
(328 strony)
(328 strony)
Serwery Red Hat NETSCAPE DIRECTORY SERVER 6.2 - GATEWAY CUSTOMIZATION Przewodnik Instalacji
(142 strony)
(142 strony)
(32 strony)
Serwery Red Hat NETSCAPE ENTERPRISE SERVER 6.0 - NSAPI PROGRAMMER GUIDE Podręcznik Użytkownika
(332 strony)
(332 strony)
Serwery Red Hat NETSCAPE ENTERPRISE SERVER 6.1 - PROGRAMMER GUIDE TO SERVLETS Przewodnik Instalacji
(72 strony)
(72 strony)
Serwery Red Hat NETSCAPE ENTERPRISE SERVER 6.0 - PROGRAMMER GUIDE TO SERVLETS Instrukcja Instalacji
(92 strony)
(92 strony)
Velleman PCUSBVGA2 manuales
Manuales del propietario y guías del usuario para Accesorios De Computador Velleman PCUSBVGA2.
Ofrecemos 1 manuales en pdf Velleman PCUSBVGA2 para descargar gratis por tipos de documentos: Manual de usuario
Komentarze do niniejszej Instrukcji